Does RG-S2928G-E V3 support web configuration?
Does RG-S2928G-E V3 support web configuration? or just command lineDear sir
Yes, RG-S2928G-E V3 can support web management.
You can try to configure switch management ip address via this guide: https://community.ruijienetworks.com/forum.php?mod=viewthread&tid=1444 and try to login to its web interface to manage it.
Best regards
Jenny
GTAC-Jenny replied at 2023-12-8 15:07
Dear sir
Yes, RG-S2928G-E V3 can support web management.
hi, i try already, i set the vlan 1 to 192.168.1.1, i am able to ping it and console, but cannot access web based via firefox
data/attachment/forum/202312/08/151659piydeidd22wrd4ij.pngdata/attachment/forum/202312/08/151717v0tno060duppos15.png
data/attachment/forum/202312/08/151849ur3r3qqah2v3qmp3.png
data/attachment/forum/202312/08/151804gnnlrri2knthsn6h.png
replied at 2023-12-8 15:18
hi, i try already, i set the vlan 1 to 192.168.1.1, i am able to ping it and console, but cannot a ...
Dear sir
You can type: show service to check whether the web management has been enabled on the switch.
If it is disabled, you can use this command to enable web service then check again:
config te
enable service web-server
Best regards
Jenny
Pages:
[1]