We are really worried about your new update. After updating the new update, AP_RGOS 11.9(6)W3B1, Release (11160201), all 150 of our AP's failed to sync the SSID, so we delivered the drive configuration manually, The SSID synced, but we were not able to deliver the DHCP, so we were not able to provide WiFi to our staff and students. Kindly rectify the issue as early as possible. We are ready to share the Project Login credentials OUR AP MODEL: 1) AP820-L(V2) - 100 Nos 2) AP820-L(V3) - 50 Nos |
Hello SVGI Puducherry, I‘m sorry that we can't provide a specific solution for you based on current information. Can you help to check the following aspects: 1. What was the previous version, and from what version to the current version 2. May I know what device is your uplink gateway? Is it a firewall? Or any modem with firewall function? If yes, you need pass these ports and domains: Note that if it is not manually added to the list that is released, it is blocked by default.Release in both the outgoing and incoming directions. *Please note that the above sharing is based on the location of your community (Country/Region: India) if the location is not the location of the device, or is not the cloud host you are using, please let me know. If the issue still exists, please help to collect the capture packet information and talk with me again. When capturing packets, click Manual delivery on the cloud. Please share the capture packet with me. I would be glad to help you in Community. |
GTAC-Micca replied at 2024-5-4 17:46 We fine-tuned the setting you suggested, but still, the issue is there in 25 AP's: SSID not syncing; it is failed. And other issues raised: DHCP Note assigned to user by AP itself, because DHCP automatically turns off when it restarts if any power goes out, so IP obtaining failed to User Mobile, We attached our setting screenshots; please give the solution. |
SVGI Puducherry replied at 2024-5-6 15:15 Previous Firmware Version:AP_RGOS 11.9(6)W1B1, Release(09180101) Current Firmware Version: AP_RGOS 11.9(6)W3B1, Release(11160201) |
SVGI Puducherry replied at 2024-5-6 15:16 Hello, I‘m sorry that we can't provide a specific solution for you based on current information. Can you help to check the following aspects: 1. May I know what device is your egress gateway? Do you have firewall on this network? Or any modem with firewall function? If so, please share the configuration of the released port or domain name for me to check. If not, please share the me the model of your gateway. 2. About the problem that DHCP automatically disables. Can I know if all APs have this problem? 3. If possible, please share your project with me. In order to protect the safety of your project, please share to my email guominxiang@ruijie.com.cn If you have other questions, please talk with me again. I would be glad to help you in Community. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd