The wired repeater mode: relies on an Ethernet cable to provide reliable transmission over a more stable Wi-Fi network with less interference. You are advised to use the wired repeater mode. Ensure that the primary router can access the Internet with the DHCP server enabled. Otherwise, the configuration will fail. the Access Point refers to the wired repeater mode Click [More] --> [Work Mode]--> [Access Point] Notice: Make sure device has plugged into the primary router |
Should the Primary router be set to router mode? then the wired repeater router be set to access point? |
Glemor Joaquin replied at 2024-7-13 08:49 Hi, Glemor Joaquin Yes, the primary router should be set to Router mode. Best regards, Jayden |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd