|
The switch or line card is abnormally restarted. |
|
Possible causes 1) Power supplysystem fault 2) Software defect 3) Hardware fault Troubleshooting procedureStep1: Check the environment of the switch1) Check whether the power cable is inserted tightly. Ifthe power cable is loose, the power supply may be unstable and the switch maybe abnormally restarted. If possible, take pictures of the power supply andsocket. For example: Run the show log command to checkwhether the following information is displayed: “The power notenough, current system is in danger.” Check whether the input power is sufficient. 2) Check whether the input power matches the rated inputpower. If the switch is a chassis device with dual power supplies, connect thecables to sockets based on the cable type to prevent insufficient input for thesingle system. Step2: Check whether the device has been manuallyrestarted. Run the show log command to check whether the device has been manually restarted. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
