|
What is the signal strength requirement to guarantee the bridging link and video transmission quality? |
|
Use the multi-hop bridging scenario in AP630series products as an example. The bridging uplink of the root bridge iscalled as the main link. To ensure the main link stability, the uplink RSSImust be at least 30. The linkbetween the root bridge and a non-root bridge is called as a single link. Toensure the single link stability, theuplink RSSI must be at least 25. If the signal strength is lower than thespecified value, adjust or change the AP location, to avoid that the videocannot be transmitted due to too low bridging performance caused by weaksignal. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 4
