Forgot password?
 Register now

Welcome to use this form to feedback your problems with Ruijie Community

The category of your feedback

Your Feedback

Your Email address (optional):

Poor roaming experience issues Reply

User 16334

Level 1

Poor roaming experience issues
1730 1 2024-3-13 15:47:06
Original
Is EG105GW-X can roaming with M18?

We have 4 APs at home
1. EG105GW-X
2. M18
3. M18
4. RAP6262(G)

When I conected to EG105GW-X on 2nd floor and I go to 1st floor, it not roaming between EG105GW-X and M18. It roaming between EG105GW-X and RAP6262(G).









On AI Diagnostics, it show the failure about Poor roaming experience.





Could you please kindly advise?


RG-RAP6260(G)

Wireless Mesh Wi-Fi Wireless Bridge Network Setting
0 2024-3-13 16:13:07 View all replies
Dear sir

May I know whether the roaming can work between the RAP and M18? Please help try to modify the device radio settings as the following recommendations:
(1) The AP power must be appropriate and the signal is not interrupted between the aps. The ideal signal strength is -65dbm in AP coverage area edge
(2) The adjacent AP channels must be non-overlapped channel to avoid same frequency interference and packet loss. For example in non-high-density deployment scenarios, 2.4G channels are recommended to use 3 non-overlapping channels 1, 6, and 11 for planning. If it is a high-density deployment site, it is recommended to use 4 channels 1, 5, 9, and 13 for planning; 5G channels are recommended to use 149, 153, 157, 161, 165, 36, 40, 44, 48, 52, 56, 60, 64, a total of 13 non-overlapping channels are planned.
(3) You can also modify the roaming sensitivity to higher to test roaming again.
If the problem still exists, please help use roaming test tool via Ruijie Cloud APP and send us the roaming reports to our email: service_rj(Ruijie International) <service_rj@ruijienetworks.com> attached this link. We will check and provide a better solution for you ASAP.






Best regards
Jenny

Related Posts
Product Model

Share this topic to

Cancel

This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.

More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.

©2000-2023 Ruijie Networks Co,Ltd