Ruijie Community

Title: SSID radius attribute accounting [Print this page]

Author: M.S.Bezzubov@mg Time: 2024-3-29 17:22
Title: SSID radius attribute accounting
Hi there!

I have a configured a WLAN auth via 802.1x . So as radius server we are using Cisco ISE. I have add to the config:

aaa accounting update

aaa accounting network ISE start-stop group ISE

aaa accounting network default start-stop group ISE

aaa authentication login default local

aaa authentication dot1x ISE group ISE

aaa authentication web-auth default group ISE

aaa group server radius ISE

radius vendor-specific extend

radius-server authentication vendor cisco package

radius-server account attribute 30 package

radius-server account vendor cisco package

Auth itself working just fine. However I don't see any VSA or radius attribute 30 values. First of all, I don't see any Auth Call Station ID type (default to AP MAC Address:SSID) to use SSID attribute at ISE authorize rules over accounting values.
What have i missed over WAC config?

Author: GTAC-Jayden Time: 2024-4-1 09:37
Dear Max Bezzubov,

Could you please provide the device SN and version?
You may refer to page 1949 of the configuration guide in the following link to configure the RADIUS attributes:
https://www.ruijienetworks.com/resources/preview/rg-wlan-configuration-guide-rgos11-9-6-w3b13-en

Best regards,
Jayden

Author: M.S.Bezzubov@mg Time: 2024-4-2 23:14

GTAC-Jayden replied at 2024-4-1 09:37
Dear Max Bezzubov,

Could you please provide the device SN and version?

Hi
imho
I've already configured didnt I?

radius-server account attribute 30 package
radius-server account vendor cisco package

Welcome to Ruijie Community (https://community.ruijienetworks.com/)