How to schedule disable POE function on the specific port on Ruijie Switch?

Requirements
If you need to periodically turn off the POE powerfunction for a specific port on the switch, so that the devices powered throughthe POE port(like camera) are periodically power off.
Configuration Tips
First check the time of Switch
Ruijie#show clock


Configuration Steps
1. Set time range
Ruijie#configure terminal
Ruijie(config)#time-range poe-time
Ruijie(config-time-range)#periodic Saturday 23:05to 23:10


(you can also choose other choice according to your needs)



Ruijie(config-time-range)#exit
2. Apply on the specific port
Ruijie(config)#interface gigabitEthernet  0/1
Ruijie(config-if)#poe power-off time-range poe-time


Ruijie(config-if)#end
Ruijie#wr
Verification
Before:


After:



When the time after 23:10



Notices:
If you don't need to turn off this function on thisport anymore, this is the command:
S5310E(config)#interface gigabitEthernet  0/1
S5310E(config-if-GigabitEthernet 0/1)#no poepower-off time-range
S5310E(config-if-GigabitEthernet 0/1)#end
S5310E#wr

So, can we create a port group and apply this setting to this group?
Also can the time period be annual instead of daily or weekly?

Mevlüt Sargın replied at 2023-11-30 22:39
So, can we create a port group and apply this setting to this group?
Also can the time period be ann ...

Dear,

please access our RITA for a more detailed information regarding this issue: www.ruijienetworks.com/rita