|
Application Scenario In CCTV scenario, you can manage camera remotely and can do remote reboot camera via Ruijie Cloud. You would notice that camera failure in the first place to fast recover from camera failure. Configuration Steps 1. The IPC must be directly connected to a managed switch or a smart CCTV switch (Reyee ES2 series) 2. Click Detect then the cloud will detect the IPC traffic after the IPC has been running normally for at least 20 minutes.  3. You can also add NVR and the camera can be detected through the NVR.  Web-page View Network Topology  Configuration Steps a. The IPC must be directly connected to a managed switch or a smart CCTV switch (Reyee ES2 series) b. Click Detect then the cloud will detect the IPC traffic after the IPC has been running normally for at least 20 minutes.  c. You can also add NVR and the camera can be detected through the NVR. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 4
