chenlin5@ruijie Publish time 2021-4-22 15:27:43

How to Setup WAN Load Balance on RG-EG

How to Setup WAN Load Balance on RG-EG

admin Publish time 2021-6-28 16:56:16

WAN Load Balance
The load balancing function distributes the data to multiple WAN interfaces to avoid the traffic congestion and provide redundancy.
1.Network Topology
https://img2.sobot.com/console/eee7ec2e351e4569a4791536fb5f0973/kb/image/ce292c4bf6c44f56995e6612d7f381c6.png
2.Configuration Key Points
1. Configure IP address of the WAN ports and default routes.
2. Enable the load balancing policy.
3. Customize interface weight to ensure that traffic goes through the different egress according to weight.
3.Configuraiton Steps
Step 1: Configure WAN 0
https://img2.sobot.com/console/eee7ec2e351e4569a4791536fb5f0973/kb/image/a257c18e338e46cb90926cbf19d265cb.pnghttps://img2.sobot.com/console/eee7ec2e351e4569a4791536fb5f0973/kb/image/f3ec15b6ce2a4fa5811e9127a2bb099b.png
Step 2: Change the LAN1 port to WAN port
https://img2.sobot.com/console/eee7ec2e351e4569a4791536fb5f0973/kb/image/739300fb352640889de01d83d09a67fb.png
Step 3: Configure WAN 1
https://img2.sobot.com/console/eee7ec2e351e4569a4791536fb5f0973/kb/image/5b65b6ca169b432c9c8ab7c34b4a26e5.png
Step 4: Enable Load Balance
https://img2.sobot.com/console/eee7ec2e351e4569a4791536fb5f0973/kb/image/0ea4437c6b044146926e6613dfb110ee.pngStep 5: Configure the interface weight
https://img2.sobot.com/console/eee7ec2e351e4569a4791536fb5f0973/kb/image/85296decffaa4fa8967af68d1d7b7b1c.png
https://img2.sobot.com/console/eee7ec2e351e4569a4791536fb5f0973/kb/image/e7dd8ab0ba0c435e9d17d8caf46f371d.png
https://img2.sobot.com/console/eee7ec2e351e4569a4791536fb5f0973/kb/image/467c3cb078c74de99f0a4270247fbd1b.png
4.Configuration Verfication
https://img2.sobot.com/console/eee7ec2e351e4569a4791536fb5f0973/kb/image/3eada4a1e46a43a5bc7c0c537cbaeae1.pnghttps://img2.sobot.com/console/eee7ec2e351e4569a4791536fb5f0973/kb/image/62c322d614704c73a341b1f40bc7ce7b.png
Advice to add the following configuration to convert to reachable link when one of link can't be reached

https://img.sobot.com/console/eee7ec2e351e4569a4791536fb5f0973/kb/image/990217c8d40e4468beff56725496bd18.png
IP address： The IP need to be reached

Next Hop IP: The gateway IP of yourWAN port IP



Pages: [1]
View full version: How to Setup WAN Load Balance on RG-EG