Help with setting up M-Lag
Edited by eromanov@rubytech.ru at 2021-6-8 15:53There is an RG-S6510-32CQ. How to configure M-Lag 40Gb on it?:'(
I have enabled the protocol spanning-tree v-stp enable and the information indicates that Mlag is disabled.
R2#sh spa v information
V-STP status : enable
Local bridge mac : c0b8.e674.34d0
Selected bridge mac : 0000.0000.0000
Peerlink Port : Virtual-port
Calculate Virtrual Index : 4095
Mlag Remote device connected : N
MST 0 Root Port : None
Two switches are connected by 40G and 1 aggregated port is made.
R2#sh aggregatePort 1 summary
AggregatePort MaxPorts SwitchPort Mode Load balance Ports
------------- -------- ---------- ------ ---------------------------- -----------------------------------
Ag1 16 Enabled TRUNKsrc-dst-mac Hu0/1 ,Hu0/2
R2#sh vrrp brief
Interface GrpPri timer OwnPre State Master addr Group addr
VLAN 10 1 100 3.60 - P Backup10.0.10.11 10.0.10.1
VLAN 20 1 120 3.53 - P Master10.0.20.12 10.0.20.1
VLAN 30 2 100 3.60 - P Backup192.168.0.11 192.168.0.10
R1#sh vrrp brief
Interface GrpPri timer OwnPre State Master addr Group addr
VLAN 10 1 120 3.53 - P Master10.0.10.11 10.0.10.1
VLAN 20 1 100 3.60 - P Backup10.0.20.12 10.0.20.1
VLAN 30 2 100 3.60 - P Master192.168.0.11 192.168.0.10
what is the problem? HELP ME!!!
Pages:
[1]