ty.principal@pe Publish time 2021-6-9 21:31:15

XS-S1920 Switch cannot reflect on cloud after change IP Address

Hi All

Recently I setup a new XS-S1920 switch, it's initially using DHCP and reflcet in ruijie cloud.

Then, I changed it to fixed IP Address and reload the system, the ip is successfully established, but ruijie cloud cannot reflect the change and showed the device offline.

Does any can help?

Thanks


dongling Publish time 2021-6-10 09:42:07

Hello, sir
Please check if configure DNS, if not, please configure DNS to 8.8.8.8.
Kind regards
Sunny

ty.principal@pe Publish time 2021-6-10 13:10:47

Tried but no luck. I also try to configure cwmp based on the ruijie cloud quick guide. is it necessary to unbind the device and reconnect again?

ty.principal@pe Publish time 2021-6-10 13:13:48

can configure other DNS up?

ty.principal@pe Publish time 2021-6-10 13:14:29

can configure other DNS IP?

dongling Publish time 2021-6-10 16:14:53

better use 8.8.8.8.
can you ping 8.8.8.8 and cloud.ruijienetworks.com?
please input command "show cwmp config" "show cwmp stats"
and show me the result.

ty.principal@pe Publish time 2021-6-10 19:29:19

dongling replied at 2021-6-10 16:14
better use 8.8.8.8.
can you ping 8.8.8.8 and cloud.ruijienetworks.com?
please input command "show cw ...

Failed. How to set the gateway? using command ip route 0.0.0.0 0.0.0.0 x.x.x.x is not work

ip route 0.0.0.0 0.0.0.0 10.x.x.1
                            ^
% Invalid input detected at '^' marker.

Thanks

dongling Publish time 2021-6-11 09:12:24

Please try this:
Ruijie>enable
Ruijie#configure terminal
Ruijie(config)#ip default-gateway x.x.x.x ---gateway IPRuijie(config)#end
Ruijie#

ty.principal@pe Publish time 2021-6-11 10:17:59

tried but return above error. is that any GUI can change the gateway option?

ty.principal@pe Publish time 2021-6-11 20:46:34

Edited by ty.principal@peck.edu.hk at 2021-6-11 20:56


<ignore_js_op>
<p>Not Work</p>
<img src="data/attachment/forum/202106/11/205557o4aa6udk6daen651.png" alt="Not Work" title="Not Work" />

</ignore_js_op>

ty.principal@pe Publish time 2021-6-12 15:19:48

Edited by ty.principal@peck.edu.hk at 2021-6-13 11:22

It's finally work. need to use the following command while configure terminal.

ip default-gateway x.x.x.x(your gateway IP)

*no need to use command "ip route 0.0.0.0 0.0.0.0 x.x.x.x" in my device
thanks all your support.

Cheers

dongling Publish time 2021-6-17 13:52:52


Ruijie>enable
Ruijie#configure terminal
Ruijie(config)#ip default-gateway 192.168.1.254   
Ruijie(config)#end
Ruijie#write
Sir, please try this command

admin Publish time 2021-7-28 15:07:00

ty.principal@pe replied at 2021-6-11 20:46


Dear sir,

Please try with this command
Ruijie#con ter
Ruijie(config)#ip default-gateway x.x.x.x ---gateway IP
Ruijie(config)#end
Ruijie#wr

GTAC-Daisy Publish time 2021-8-3 15:03:17

ty.principal@pe replied at 2021-6-11 20:46


Please try with the following
Ruijie#config ter
Ruijie(config)#ip default-gateway x.x.x.x

GTAC-Daisy Publish time 2021-8-4 15:45:16

ty.principal@pe replied at 2021-6-11 20:46


try with the command
Ruijie#config ter
Ruijie(config)#ip default-gateway 192.168.1.1
Ruijie(config)#end
Ruijie#wr
Pages: [1]
View full version: XS-S1920 Switch cannot reflect on cloud after change IP Address