How to configure L2TP VPN on Reyee EG?
Introduction of L2TP VPNl L2TP VPN usually is used for the clients to site scenario and site to site scenario. For example, clients work from home but he need to access company server through L2TP VPN tunnel. Another example is that a company has three branches which are distributed in three different places of the Internet, and everyone need to establish a tunnel with each other by a gateway.Application ScenarioClients to Site Scenariohttps://singapore-1312056779.cos.accelerate.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image132.gifSite to Site Scenariohttps://singapore-1312056779.cos.ap-singapore.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image133.gif 1.14.1Clients to Site Scenario Configuration(1) On the HQ side:a Log in to Reyee EG by the default IP 192.168.110.1.b Click Setup->VPN->L2TP and enable L2TP.https://singapore-1312056779.cos.ap-singapore.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image134.jpghttps://singapore-1312056779.cos.ap-singapore.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image135.jpgc Configure the L2TP setting and click Save.https://singapore-1312056779.cos.ap-singapore.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image136.jpgdConfigure VPN clients.https://singapore-1312056779.cos.ap-singapore.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image121.jpghttps://singapore-1312056779.cos.ap-singapore.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image137.jpghttps://singapore-1312056779.cos.ap-singapore.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image006.gif Note
● The local address and the IP range of the address pool cannot conflict with the internal network address of the device.● Local address:The local virtual IP of the VPN tunnel, the PC can access the server through this address after dialing in.● Address pool IP range: T the IP address pool assigned by the L2TP server to the clients.● The PPP link maintenance interval is the default, which refers to the interval at which PPP link maintenance detection messages are sent after PPTP is connected.
(2) On the Clients side(take Windows 10 as example):a Enter Control Panel→Network and Internet→Network and Sharing Centerhttps://singapore-1312056779.cos.ap-singapore.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image138.jpghttps://singapore-1312056779.cos.ap-singapore.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image139.jpg https://singapore-1312056779.cos.ap-singapore.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image140.jpgb Configure VPN connectionhttps://singapore-1312056779.cos.ap-singapore.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image141.jpg https://singapore-1312056779.cos.ap-singapore.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image142.jpg https://singapore-1312056779.cos.ap-singapore.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image143.jpg https://singapore-1312056779.cos.ap-singapore.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image144.jpg https://singapore-1312056779.cos.ap-singapore.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image145.jpgc Change adapter’s setting.https://singapore-1312056779.cos.ap-singapore.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image146.jpghttps://singapore-1312056779.cos.ap-singapore.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image147.jpghttps://singapore-1312056779.cos.ap-singapore.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image148.jpgd Check the Status of Connect VPN Connection Status.https://singapore-1312056779.cos.ap-singapore.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image149.jpg https://singapore-1312056779.cos.ap-singapore.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image150.jpg https://singapore-1312056779.cos.ap-singapore.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image151.jpg 1.14.2Site to Site Scenario Configuration
Application Scenariohttps://singapore-1312056779.cos.ap-singapore.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image152.gif(1) On the HQ side:a Log in to Reyee EG by the default IP 192.168.110.1b Click Setup->VPN->L2TP and then enable L2TP, choose L2TP type as Server.https://singapore-1312056779.cos.ap-singapore.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image153.jpghttps://singapore-1312056779.cos.ap-singapore.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image154.jpgc Configure the L2TP settings and click Save.https://singapore-1312056779.cos.ap-singapore.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image155.jpgd Configure VPN client.https://singapore-1312056779.cos.ap-singapore.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image121.jpghttps://singapore-1312056779.cos.ap-singapore.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image156.jpghttps://singapore-1312056779.cos.ap-singapore.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image006.gif Note
● The Peer Subnet is the local IP range of its branch.
(2) On the Branch side:a Log in to the Reyee EG by the default IP 192.168.110.1b Click Setup->VPN->L2TP and then enable L2TP, choose L2TP type as Client.https://singapore-1312056779.cos.ap-singapore.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image157.jpghttps://singapore-1312056779.cos.ap-singapore.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image158.jpghttps://singapore-1312056779.cos.ap-singapore.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image006.gif Note
● Work Mode description：● NAT: NAT the incoming L2TP packets (Replace the source IP address with the local virtual IP address).● Router: Only route the incoming L2TP packets.
c Check the VPN connection status.https://singapore-1312056779.cos.ap-singapore.myqcloud.com/FU/Article/ArticleHtml/7fa927dd-09d5-42c5-80d7-99c11778d11a/Reyee%20FAQ%20V1.0.files/image159.jpg no image?
mrjccdv replied at 2023-4-26 14:39
no image?
Thank you for your feedback, now the images are displayed normally.
Hello, as of now L2TP IPsec cant go through in the PPOE connection.
Any alternative solution for this?
thank you
mrjccdv replied at 2023-8-5 09:00
Hello, as of now L2TP IPsec cant go through in the PPOE connection.
Any alternative solution for thi ...Dear mrjccdv,
If the VPN does not connect, you can troubleshoot according to this guide: https://community.ruijienetworks.com/forum.php?mod=viewthread&tid=2301&extra=page%3D4
If you have a dynamic public IP, you can configure DDNS for the device so they can establish VPN connection via domain name.
Best regards,
Jayden
Pages:
[1]