Forum › Switch › How to modify the interface MTU of S5310?

GTAC-Sophia Publish time 2023-6-27 11:43:38

How to modify the interface MTU of S5310?

You can modify the MTU according to the followingcommand
S5310E(config)#int g0/1
S5310E(config-if-GigabitEthernet 0/1)#mtu 1500
The range of MTU configuration is 64-9216
data/attachment/forum/202306/27/114304jbowgjadyg0bnnv0.png

You can check the current value of MTU through this command
Ruijie#show interface gigabitEthernet 0/2
data/attachment/forum/202306/27/114319rduu2e1ai8xa1axc.png

View full version: How to modify the interface MTU of S5310?