How to power off the S7808C switch instead of unpluging the power cable?
You can use this command to power on or off the specified board.power{on | off} devid] slot slotid
on:Powers on the specified board.
off:Powers off thespecified board.
switchdevid: It is supported inVSU mode only. It specifies the chassis No. of the specified board to be powered on/off. By default, it refers to the current chassis.
slot slotid: Specifies the slot No. of the board to be powered on/off. The supervisor modules are inserted in M1 and M2 slots. The FE cards are inserted in FE1, FE2,FE3, and FE4 slots.
Pages:
[1]