Static route question EG105G-V2
Hello. Thanks in advance for your help.Im trying to setup a static route to enable my office using EG105G-V2 to reach some resources.
Topology :
Site1 - VPN to Azure & VPN to Site2 / Both net segments added (azure and Site1)
Site2(EG105G-V2) - VPN with Site1
I want Site2 to be able to reach resources in Azure using the VPN to site1
Site the ping works fine but If I try to ping resources in Azure it fail. Please advise.
Dear Mauricio,
Please check this link on how to configure static route on Reyee EG:
https://community.ruijienetworks.com/forum.php?mod=viewthread&tid=5821&extra=page%3D1
Best regards,
Jayden
GTAC-Jayden replied at 2023-7-18 10:16
Dear Mauricio,
Please check this link on how to configure static route on Reyee EG:
Hi Jayden,
I reviewed that link before, Im not able to make it show reachable. What should I use as next hop? I have tried few things but no luck so far.
Mauricio Molina replied at 2023-7-18 10:20
Hi Jayden,
I reviewed that link before, Im not able to make it show reachable. What should I use...
Dear Mauricio,
The next hop should be Site 1 IP address, as based on the topology you provided, the traffic going to Azure from Site 2 should be directed to Site 1 first for further routing.
Best regards,
Jayden
GTAC-Jayden replied at 2023-7-18 11:31
Dear Mauricio,
The next hop should be Site 1 IP address, as based on the topology you provided, t ...
I tried that with no success. I had another appliance before (not reyee) and I used to do it just like that. Not sure why is not working with this new device.
Mauricio Molina replied at 2023-7-18 21:56
I tried that with no success. I had another appliance before (not reyee) and I used to do it just...Dear Mauricio,
May I please know if the device is online on Ruijie Cloud? Could you please share the cloud project with me to check? Please kindly email to service_rj@ruijienetworks.com and include the Case ID CS20230719-2119656 in the subject line.
Best regards,
Jayden
Pages:
[1]