How to configure Side-To-Side VPN on the new UI of Ruijie Cloud?
1. Introduction:In this scenario, the networks of the HQ and Branch are connected to the Internet through fixed gateways, and the networking is relatively fixed.
For now, Ruijie Cloud only supports IPSec VPN mode when you choose Side-To-Side VPN.
2. Topology:
data/attachment/forum/202308/09/130839go2oel3zkw3rglo6.png
3. Configuration Steps on VPN Server side:
3.1 Login to the Ruijie Cloud, go to the project where your gateway is currently in. Click the VPN button.
data/attachment/forum/202308/09/130846uk2qknsk8kb82bm9.png
3.2 Click Add VPN Policy button, choose the Side-To-Side VPN, choose Headquarters as the role, and set the other VPN parameters.
Please note that the IP Subnet can not be conflicted on both sides, and the pre-share key & advanced setting must be the same on both sides.
data/attachment/forum/202308/09/130854mb3g73ouj3oedbeq.png
data/attachment/forum/202308/09/130859tho0a0ao93gkn5o0.png
4. Configuration Steps on VPN Branch side:
For the Branch project, you need to choose the Branch as the role, and input the correct HQ IP or domain,
Please note that the IP Subnet can not be conflicted on both sides, and the pre-share key & advanced setting must be the same on both sides.
data/attachment/forum/202308/09/130909w54lbdb0qgg41hxd.png
5. Result:
You can check the VPN connection status on Ruijie Cloud like this:
data/attachment/forum/202308/09/130916r9ox11u7s5ehap31.png
You can also check the status on the eweb page of your Reyee device:
data/attachment/forum/202308/09/130923ymy4yx4nfxif4fuy.png
Pages:
[1]