Forum › Ruijie Cloud › How to configure IP-based rate limiting on the new Ruijie Cloud?

linyonghang1@ru Publish time 2023-8-11 10:21:16

How to configure IP-based rate limiting on the new Ruijie Cloud?

1.What is the IP-based rate limiting?

IP-based rate limiting is used to limit the rate of a single IP or IP range. You can limit both application and rate.

Note:IP-based rate limiting function supported by Reyee and Ruijie Gateways

2.How to configure it on the new Ruijie Cloud?

1)Topology(EG105GW-X is used as an example)

data/attachment/forum/202308/11/101944w6vlqqm6l23k2jql.png

2)Enter your project through the new Ruijie cloud. Click Network-Wide---Traffic Control

data/attachment/forum/202308/11/101950ic5xah95x3xw944j.png

3)Click To configure under 1 Flow Control

data/attachment/forum/202308/11/101955zdz4k224dqnddbqq.png

4)Select Template as your environment and configure wan port rate

data/attachment/forum/202308/11/102001h9qydou9o61bp18d.png

5)Clicek Custom traffic control policy---Add---IP Traffic Control

data/attachment/forum/202308/11/102005rx8nm975wwx57i8w.png

6)Custom traffic control policy (Take a single IP address as an example)

data/attachment/forum/202308/11/102012bm17w5m2zvwm0c15.png

data/attachment/forum/202308/11/102016h2l8r2ruz68oeri2.png

data/attachment/forum/202308/11/102023hsshjjs3seze6s55.png

Note:Overall rate limit: Indicates that all users(all IP addresses in an address range)share the configured uplink and downlink bandwidths, and the bandwidth of a single user is not limited.

Per IP rate limit: Indicates that all users(all IP addresses in an address range) share the configured uplink and downlink bandwidths, and the maximum bandwidth of a single user can be limited.

data/attachment/forum/202308/11/102034tlowhbowjzoh99jb.png

7)check the policy

data/attachment/forum/202308/11/102039ohr8nrxokowwe3kj.png

8)Verify configuration

Before enable

data/attachment/forum/202308/11/102046xpsszh4upw9k6psh.png

       data/attachment/forum/202308/11/102054vff9bmp0nfm9bx97.pngdata/attachment/forum/202308/11/102059zlfbtbctczijbfl0.png

After enabling

data/attachment/forum/202308/11/102105zdy2tzqtdegd2gw9.pngdata/attachment/forum/202308/11/102110tvvuvipwdp1cdv2t.pngdata/attachment/forum/202308/11/102114pnnpsqeplqjamf9a.png

troy@tronic.com Publish time 2023-10-23 17:43:42

Thankyou very helpful

View full version: How to configure IP-based rate limiting on the new Ruijie Cloud?