How to login in reyee EG( AC mode) web?
1. After changing to AC mode, the EG will automatically restart. After the handover is successful, all interfaces are equivalent to a WAN port.: If the upper gateway has DHCP enabled, EG obtains the address through DHCP. You can view the ip address obtained by EG in the address pool of the upper gateway and log in with this address.
: If the upper gateway does not open DHCP, the PC needs to be directly connected to EG, and configure the ip address of the PC to 10.44.77.0/24 network segment, enter the web interface 10.44.77.254 log in to EG in the web browser
2. If EG and AP have formed SON, you can connect the wireless signal of AP, log in to AP with 10.44.77.253, 10.44.77.254, 192.168.120.1, check the IP address of the master device EG in the device list, and log in to EG through this address.
Pages:
[1]