How to create a local network without Internet access on EG105GW?
How to create a local network without Internet access on EG105GWLog in to the device in wired mode: (1) Connect a PC to a LAN port of the EG. (2) Configure IP addresses of the PC and management interface to be on the same network segment. (3) Visit http://10.44.77.254 or 192.168.110.1 through a browser. (4) Enter local web of the EG
gateway-network-LAN--add, then you may create local network
data/attachment/forum/202310/20/223800onnkxjcvs1ct26cc.jpg
GTAC-Sophia replied at 2023-10-20 22:38
Log in to the device in wired mode: (1) Connect a PC to a LAN port of the EG. (2) Configure IP addre ...
Tell me how to make sure that there is no access to the Internet on this local network
VitaliyPryakhinreplied at 2023-10-23 15:04
Tell me how to make sure that there is no access to the Internet on this local network
Dear,
If you have not connect this devic to your ISP or other device can acess the internet, then generally it can not access the internet. If you want to check and confirm if this device can access the internet, you can try to ping on its web.
Thank you for your time.
Best regards,
Vivian
GTAC-Vivian replied at 2023-10-23 15:32
Dear,
If you have not connect this devic to your ISP or other device can acess the internet, then...
Is it possible to programmatically restrict local network access to the Internet?
VitaliyPryakhinreplied at 2023-10-23 16:09
Is it possible to programmatically restrict local network access to the Internet?
Dear,
Yes, please kindly make sure the gateway has not configured the NAT, and also you can set an ACL to block the traffic. If you want to block all traffic, please input 0.0.0.0/0 or input the ip range you don‘t want them to acess the internet. The destination ip adress is 8.8.8.8.
data/attachment/forum/202310/23/192451djic939zjn5qic39.jpeg
Pages:
[1]