RG-ES209GC-P linked to a master before upgrade are unable to upgrade after
Hi,I have some RG-ES209GC-P switches. I prepared and configured few of them in my workshop and the system prompt me for an upgrade from ESW_1.0(1)B1P3,Release(07200415) to ESW_1.0(1)B1P21,Release(10201010), then I link them to the networkwide management.
For the rest of them, which are still in ESW_1.0(1)B1P3,Release(07200415)
, I linked to the networkwide management (Master switch) and configured them in the same time. however, when I try to access to them on the unified console from the master, it prompt me to connect to directly to the IP address of the switch to perform the upgrade. But on the upgrade page, it's said that I run the latest version.
Also, I could not download the firmware online, there are no firmware available for
RG-ES209GC-P to do it manually.
How can I upgrade them? without loosing configuration or moving around every equipments around the buildings?
Do you know where I can find the firmware ESW_1.0(1)B1P21,Release(10201010) for RG-ES209GC-P?
Kind Regards,
Dear,
Please refer to this link and download the bin file. Then upgrade on the web interface.
Ruijie RG-ES Series Switches Firmware(ES205GC-P, ES209GC-P) - Ruijie Networks
Best regards,
Vivian
GTAC-Vivian replied at 2023-11-1 18:15
Dear,
Please refer to this link and download the bin file. Then upgrade on the web interface.
Ruiji ...
Dear Vivian,
Thanks for your quick support in that matter, the upgrade works fine on the first one.
Kind Regards,
Steve
Edited by GTAC-Vivian at 2023-11-1 19:35
Steve G replied at 2023-11-1 18:25
Dear Vivian,
Thanks for your quick support in that matter, the upgrade works fine on the first one ...Dear,
Thank you a lot. I am glad to hear it.
Please feel free to reach out to us if you encounter any issues in the future. We're readily to provide help whenever needed.
Our Rita website: www.ruijienetworks.com/rita
data/attachment/forum/202311/01/193534sekrkzajllzbtnkj.pngdata/attachment/forum/202311/01/193536jj5zgkpgfxppgvj4.png
Pages:
[1]