How to configure Third-Party Authentication on Reyee EG?
This feature is supported on RG-EG310GH-E,RG-EG305GH-P-E and EG310GH-P-E running ReyeeOS 2.237or later.
Open eweb locally or via cloud
data/attachment/forum/202403/11/165216m8kgrujqmjurmqkm.pngChoose One-Device >Gateway > Config > Advanced > Authentication > Cloud Auth.
data/attachment/forum/202403/11/165257hfkf96kiz9rf2hfl.png\
Toggle on Authentication. Se t Server Type to Thirdparty A uthentication , configure Auth Server URL , Client Escape andAuthentication Type , and click Save.
data/attachment/forum/202403/11/165349dcombwo9b6cwbbyf.png
(Optional) Considering the different HTTP parameters and request methods required by different third party
authentication platforms, you can customize third party authentication parameters.
data/attachment/forum/202403/11/165426sntbzzmaajaiadh7.png
3.
View authenticated clients
Choose One Device > Gateway Config > Advanced> Authentication > Online Clients
The online client list displays information about allthe current online clients, including the client IP address, client, MAC address, login time, and authentication mode. You can find the clientinformation based on the IP address,MAC address, or username.
data/attachment/forum/202403/11/165513si60g9jbd49412jb.png
If you want to kick off any client, find the targetclient in the online client list and click Delete in the Action column to kickthe client off and disconnect the Wi Fi connection of the client.
data/attachment/forum/202403/11/165757qscbqdsjvdt44tcv.png
Pages:
[1]