How to configure the Link Detection for wan port on Reyee EG?
The system supports IPv4 and IPv6 WAN linkdetection , which can be enabled separately.1. Open eweb locally or via cloud
data/attachment/forum/202403/12/091401dyb3bubvcu2he132.png2. Choose One-Device >Gateway > Config > Network > WAN > Line Detection
data/attachment/forum/202403/12/091427y3r4l4ruen0risbd.png
3. Configure WAN Link Detection
3.1 Configure IPv4 WAN Link Detection
Step 1: On the IPv4 WAN Link Detection page, toggleon Enable to enable IPv4 WAN linkdetection.
Step 2: In the WAN port list, select a WAN port forlink detection, and click Edit
data/attachment/forum/202403/12/091503vpejn1ccni841c4q.png
Step 3: Configure theparameters of the link detection function. Then click OK to save
data/attachment/forum/202403/12/091522qiqj8qiqoqymibyz.png
3.2 Configure IPv6 WAN Link Detection
Step 1: On the IPv6 WAN Link Detection page, toggleon Enable to enable IPv4 WAN link detection.
Step 2: In the WAN port list, select a WAN port forlink detection , and click Edit
data/attachment/forum/202403/12/091635vzthmbzty9lfbm19.png
Step 3: Configure the parameters of the linkdetection function. Then clock OK to save.
data/attachment/forum/202403/12/091654nm9o5hm2nwwp22u2.png
Pages:
[1]