VLAN Voice & Data on one port
Edited by Ahmed Farahat at 2024-3-25 04:59Hello
Kindly,, I have ruijie switch(Model: RG-S5310 - 48GT4XS-P-E ) I need to create DATA and VOICE Vlan on one port to connect
(CLI) (Yeaster PBX S300) and ( grandstream IP Phone ) model: GXP1620/
1625
Could you please help me
thank you in advance
For configuration, you can refer to page 469: https://www.ruijienetworks.com/resources/preview/ruijie-rg-s5300-e-s5310-e-series-switches-configuration-guide
data/attachment/forum/202403/25/092458aspbqrrbrhocddsb.png
GTAC-Micca replied at 2024-3-25 09:24
For configuration, you can refer to page 469: https://www.ruijienetworks.com/resources/preview/ruiji ...
thank you for your reply GTAC-Micca but unfortunately not working till this moment.. my scenario as the following :-
1- I have Firewall FortiGate the patch cord cable from FortiGate to switch when i configure the port to be " Trunk " Internet not working in both vlan when i assign "access port " internet working in both vlan this is the first Problem ?
2- I created 2 Vlan's , vlan 10 for Voice & Vlan 20 For Data, when I configure both vlan and connect to phone and connect from phone to Pc the phone and PCboth Taking same IP for Data Vlan
3- I am using phones "Grandstreem GXP1620/1625 " and PBX Yeastar what is the "OUI" for GrandStreem and mac-address for voice vlan ???
4- I want when i connect to phone takes voice vlan IP automatically.
I tried this configuration :-
https://community.ruijienetworks.com/forum.php?mod=viewthread&tid=781
but unfortunately not working as well
could you please send me configuration you actual tied it in real life
thank you in advance
Ahmed Farahat replied at 2024-4-23 14:16
thank you for your reply GTAC-Micca but unfortunately not working till this moment.. my scenario a ...
Dear sir
First you need to confirm whether the dhcp server can assign voice vlan ip normally. You can test if you directly connect the user device to the switch port which tagged with voice vlan, whether the user device can get voice vlan IP address successfully. If it can not get IP address of the corresponding vlan, please check whether the vlan has been allowed to pass through the passing-by switches and whether you have configured the gateway ip and the dhcp pool of the voice vlan.
After the IP phone can get the voice vlan IP address, you can configure voice vlan on the IP phone to improve the priority of voice stream transmission and ensure voice quality by transmiting voice streams in the voice VLAN, and configuring QoS specific for voice streams via this guide on page 155: https://www.ruijienetworks.com/resources/preview/75577
data/attachment/forum/202404/23/194928fqkmq7eah4ak9ode.png
OUI address is the first 24 bits of the device MAC address which refers to manufacturer information.
Note:
If IP phone supports LLDP,user doesn't need to configure OUI manually .Switch could recognize and identify IP phone by the LLDP packets sending from IP phone.
Best regards
Jenny
Pages:
[1]