Format of the Webauth URL - special characters support
Hi there!I am trying a configure a Guest access via eportalv2 . So as portal server (Captive guest portal) we are using Cisco ISE. ISE's guest portal url is looking like this:
fqdn:8443/portal/PortalSetup.action?portal=579ff068-6bf8-4d44-906f-35a6aed798f4
When I have tried to configure this url, I got an error about not supported special characters.
At CLI i have
web-auth template eportalv2
url fqdn:8443/portal/PortalSetup.actionportal=579ff068-6bf8-4d44-906f-35a6aed798f4
[*]Does Ruijie WAC having something like portal url-encode enable?
[*]At docs I've read about Configuring the Format of the Webauth URL:
(config.tmplt.eportalv2)#fmt custom encry none ise-portal Guest url
WORDUrl string name
Unfortunately at this string also does not accept url contains '?'. Any manipulation with fmt did not bring to success or I just didnt catch up it how to used it :(
So the problem is about '?'. What can we do about it?
Dear sir
as I checked "?",It is a special character that cannot be configured on the command line of the device. Therefore, you can only avoid using this special character during the configuration
GTAC-Ross replied at 2024-3-29 17:14
Dear sir
as I checked "?",It is a special character that cannot be configured on the command line o ...
I cant avoid it. Format of portal url is preconfigured at Cisco ISE.
What about fmt custom encry none ise-portal? How it is supposed to use?
Max Bezzubov replied at 2024-3-29 17:24
I cant avoid it. Format of portal url is preconfigured at Cisco ISE.
What about fmt custom encry n ...
<col>Dear sir
Unfortunately, it can not support too
Best regards,
Ross
GTAC-Ross replied at 2024-4-1 12:05
Any ideas how to avoid it?
What about fmt custom encry none ise-portal? How it is supposed to use?
Max Bezzubov replied at 2024-4-2 23:11
Any ideas how to avoid it?
What about fmt custom encry none ise-portal? How it is supposed to us ...
Hi:
Let me confirm and when we get the answer we will let you know.
Regards,
Javier
Max Bezzubov replied at 2024-4-2 23:11
Any ideas how to avoid it?
What about fmt custom encry none ise-portal? How it is supposed to us ...
Dear sir
Sorry for the later reply
as I confirmed with my colleague,We can use "
#"
instead of "?" To avoid the current problem
Best regards,
Ross
GTAC-Ross replied at 2024-4-10 20:39
Dear sir
Sorry for the later reply
Can I write in config "#" instead of "?" ?
The controller will then replace "#" with "?" when reading/executing the link?
Dmitry Shalaev replied at 2024-4-23 21:39
Can I write in config "#" instead of "?" ?
The controller will then replace "#" with "?" when rea ...
Dear Dmitry Shalaev,
Yes. Please try first. If it does not work, please feel free to contact us again.
Best regards,
Vivian
Pages:
[1]