How to configure NAT-DMZ on Reyee EG?
Choose One-Device > Gateway >Config > Advanced> Port Mapping >NAT-DMZ.Click Add.Enter the rule name and internal server IP address, select the interface towhich the rule applies, specify the rule status, and click OK. You can configure only one DMZ rule for an outbound interface.
data/attachment/forum/202404/07/155815fzzpdzn4woo0bz13.png
data/attachment/forum/202404/07/155821torzxttljmortvxx.png
Table 1-1 DMZ rule configuration
Parameter
Description
Name
Enterthe description of the mapping rule, which is identify the DMZ rule.
DestIP Address
Specifythe IP address of the DMZ host to which packets are redirected, that is, theIP address of the internal server that can be accessed from the Internet.
OutboundInterface
Specifythe WAN port in the DMZ rule. You can configure only one rule for a WAN port.
Status
Specifywhether the rule is effective. The rule is effective after you turn on Status.
Pages:
[1]