How to set Fat AP or AC password?
1. Set enable passwordRuijie#configure ter
Ruijie(config)#enable passwordruijie ------> set password to ruijie Ruijie(config)#end Ruijie#write
notice: haven't enable password default
2. Set telnet password Ruijie#configure ter Ruijie(config)#line vty 0 4 ------>enter telnet password configure mode,'0 4' means allow 5 users telnet to switch at th same time Ruijie(config-line)#login Ruijie(config-line)#password ruijie ------>set password to ruijie Ruijie(config-line)#exit Ruijie(config)#end Ruijie#write
notice: haven't enable password default
3. Set Eweb password
Ruijie#configure ter
Ruijie(config)#username admin password ruijie ------>configure eweb login password
Ruijie(config)#username admin privilege 15 ------>configure the privilege level of web account is 15,the privilege level of web management need to be 15
Ruijie(config)#ip http authentication local ------>configure web login using local username and password
Ruijie(config)#end
Ruijie#write
notice: default password is admin admin
Set a password
Pages:
[1]