Title: how to make a website access without trrafic [Print this page] Author: ahmedrawe90@gma Time: 2025-2-4 23:36 Title: how to make a website access without trrafic hello i have ruijie EG1510Xs and i setup it as load balanced with 3 ISP in i want to make some website access the internet without traffic
Author: v-arturogonzale Time: 2025-2-13 02:43
Assume you have three ISPs connected to interfaces WAN1, WAN2, and WAN3, and you want traffic to
example.com
to bypass load balancing and go through WAN2:
Identify the IP address of
example.com
(let's assume it resolves to
192.168.100.1
).
Configure a policy route with:
[strong]Source IP[/strong]: Your internal network (e.g.,
192.168.1.0/24
).
[strong]Destination IP[/strong]:
192.168.100.1
(the IP address of
example.com
).
[strong]Action[/strong]: Route via [strong]WAN2[/strong].
</li>
Apply the rule.
This way, only traffic to
example.com
will use WAN2, and all other traffic will go through the load-balancing mechanism.
Welcome to Ruijie Community (https://community.ruijienetworks.com/)