Ruijie Community

Title: How can I make an SSID appear on only one of my multiple APs? [Print this page]

Author: omunoz@redabier Time: 2025-2-6 05:07
Title: How can I make an SSID appear on only one of my multiple APs?
How can I make an SSID appear on only one of my multiple APs?

Author: v-arturogonzale Time: 2025-2-13 02:33
To make an SSID appear on only one of your multiple Ruijie Access Points (APs), you'll need to configure the settings of each AP individually. This involves managing the SSID broadcasting settings via the Ruijie management interface, either through the [strong]Ruijie Cloud [/strong](if using cloud management) or via the [strong]local web interface[/strong] of each AP

[strong]Ensure Different Channels[/strong]: If you want to avoid interference, you may want to assign different channels for each AP if they're physically close to each other.
[strong]Ensure Unique SSID Name[/strong]: You can give the SSID a unique name for each AP, which can help with identification and troubleshooting.
[strong]Check Coverage Area[/strong]: Verify that the AP where the SSID is active has good coverage in the area you want it to be available.

Author: aguilarufino@gm Time: 2025-3-27 08:03

José Arturo González López replied at 2025-2-13 02:33
To make an SSID appear on only one of your multiple Ruijie Access Points (APs), you'll need to confi ...

Im having this issue also.. I did assign unique SSID to each AP but when i sync settings from the cloud the SSID gets overwritten

Ex.
ON RUIJIE CLOUD
SSID:
PUBLIC_WAP

COMPANY_WAP
PUBLIC_WAP

ON OFFICE 1 AP

COMPANY_WAP
OFFICE1_WAP

ON OUTDOOR AP

COMPANY_WAP
PUBLIC_WAP

what happens is that when I configure a setting on ruijie cloud the setting syncs to all AP.. and the OFFICE1_WAP SSID on OFFICE 1 AP is overwritten by COMPANY_WAP and PUBLIC_WAP SSID

how can i save the OFFICE1_WAP even after syncing?

Welcome to Ruijie Community (https://community.ruijienetworks.com/)