Title: Vlan over two switches [Print this page] Author: craig@bonafide. Time: 2025-2-19 14:39 Title: Vlan over two switches Wanting to create a couple of vlans to separate my IP cameras, a guest network on a separate AP and a couple of IoT devices (so in effect 3 Vlans) that cannot see or communicate with one another)
The switches are the RG-ES210GS-P and the RG-ES206GC-P. The router (3rd party) does not support vlans.
Is it possible to do this? And if so, how. Have followed a few instructional videos to no avail.
Author: v-shaojinren@ru Time: 2025-2-19 19:26
Dear customer,
Unfortunately, to configure the VLANs you need. You will need a gateway(Usually it is your router) that supports the VLAN function
for your AP and IP cameras.
Author: howardarichie@h Time: 2025-2-24 15:44
Creating VLAN to separate IP cameras, guest networks and IoT devices is definitely a good solution to enhance network security, but you need to check the ports that support VLAN functionality to be effective right after changing the network.
Welcome to Ruijie Community (https://community.ruijienetworks.com/)