Title: Why is the network speed only 100 Mbit/s to 200 Mbit/s after an EG series device is connected with flow control disabled while the network speed reaches 300 Mbit/s in direct connection to a WAN line? [Print this page] Author: linxihao@ruijie Time: 2019-6-27 17:03 Title: Why is the network speed only 100 Mbit/s to 200 Mbit/s after an EG series device is connected with flow control disabled while the network speed reaches 300 Mbit/s in direct connection to a WAN line? The EG series device performance or the number of sessions isrestricted. Author: rabin.ghimire@g Time: 2023-12-6 01:38
Mine also same problem. MY EG209GS gateway is connected through CDATA fiber router. When I conncet directly by the CDATA router's lan port and test the speed it shows more than 900 mbps but when the gateway wan is uplink to CDATA router and I test through the LAN port of the Gateway device the speed drops to 10 mbps.
No a flow control enabled, no any ACL rules enabled, reset the device and re configure ... still the problems not solved. Author: javier@ruijie.c Time: 2023-12-6 08:52