Ruijie Community

Title: How Can I Complete Escape Settings on Simplified RADIUS? [Print this page]

Author: admin Time: 2017-5-3 17:53
Title: How Can I Complete Escape Settings on Simplified RADIUS?
How Can I Complete Escape Settings on Simplified RADIUS?

Author: admin Time: 2017-5-3 17:54

In order for Radius authentication bypass when the SAM(Radius) service down or not available, below are the command to confgure in order the bypass authentication, based on the test in XLAB UM.

aaa authentication dot1x default group radius none

aaa authentication web-auth default group radius none

radius-server timeout 1

radius-server deadtime 1

radius-server retransmit 1

In the even radius escape, all user will be able to access to internet without proper authentication been done, which mean in the web-authen, any user id (known/unknow) will be authenticated succesfully. If dot1x authentication enabled on the interface, new online user will be authenticated via the dot1x.

In order to view the full list of connected user when the radius(SAM) not available, should check with the 2 commands below.

show web-auth user all --> web-authen user

show dot1x summary --> dot1x authen user

Welcome to Ruijie Community (https://community.ruijienetworks.com/)