Ruijie Community

Title: How do I use AAA for AC logout authentication when AAA is enabled for the AC? [Print this page]

Author: GTAC-Daisy Time: 2019-7-2 08:17
Title: How do I use AAA for AC logout authentication when AAA is enabled for the AC?

Run the following commands:

Ruijie(config)#aaa new-model

Ruijie(config)#aaa authenticationlogin no-login none//Establishing an AAA login authentication list named"no-login" with the authentication mode set to noe (noauthentication).

Ruijie(config)#line con0Ruijie(config-line)#login authentication no-login//Applying the"no-login" AAA login authentication list to the console line, whichindicates that AAA authentication is not used.
Ruijie(config-line)#line vty 0 35

Ruijie(config-line)#loginauthentication no-login//During Telnet login, no password is required.

Welcome to Ruijie Community (https://community.ruijienetworks.com/)