Ruijie Community

Title: How to Log ging In to the firewall Using SSH? [Print this page]

Author: zhangqiao@ruiji Time: 2025-4-7 22:50
Title: How to Log ging In to the firewall Using SSH?

Application Scenario

When you want to configure the device or collect information in CLI management mode,but you do not have a configuration cable or you are far away from the device,you can remotely log in to the device using SSH.

Network Topology

Configuration Points

To usethe SSH login method, the connectivity between the management PC and themanagement interface address of the device must be ensured. After the pingfunction is enabled on the interface, the management PC must be able to pingthe management interface.

(1) Enable the SSH function on the interface.

(2) Manage the device using SSH.

Procedure

(1) Enable the SSH management function on the interface.

a. Choose Network > Interface > Physical Interface and edit Ge0/0 (port0/MGMT), as shown in the following figure.

Welcome to Ruijie Community (https://community.ruijienetworks.com/)