Ruijie Community

Title: How to Configuring SNMP? [Print this page]

Author: zhangqiao@ruiji Time: 2025-4-7 23:01
Title: How to Configuring SNMP?

(1)

Access the SNMP configuration page.

ChooseSystem > System Config > SNMP.

(2)

Enable SNMP.

(3)

Configure parameters for interconnecting the firewall and NMSserver.

Item	Description	Remarks
SNMP Version	Version number of SNMP. The options are v1/v2c and v3.	The selected version must match that of the NMS server. [Example] v3
SNMP Version: v1/v2c
SNMP Read-Only Community String	Community name used for authentication between the managed device and NMS server. If the NMS user uses a read-only community name for authentication, the user possesses the read-only permission to query device information.	The value must be the same as the read-only community name on the NMS. Otherwise, access from the NMS to the device may fail. Characters such as `~!#%^&*+\\|{};:'"/<>? and spaces are not allowed. [Example] public
SNMP Read-Write Community String	Community name used for authentication between the managed device and NMS server. If the NMS user uses a read-write community name for authentication, the user possesses the read-write permission on device configuration.	The value must be the same as the read-write community name on the NMS. Otherwise, access from the NMS to the device may fail. Characters such as `~!#%^&*+\\|{};:'"/<>? and spaces are not allowed. [Example] private
SNMP Version: v3
Security Username	Username used by the NMS user to access the managed device.	The value must be the same as that on the NMS. Characters such as `~!#%^&*+\\|{};:'"/<>? and spaces are not allowed. [Example] user1
Authentication Algorithm	Authentication algorithm used to verify the user identity. MD5 and SHA algorithms are supported.	The value must be the same as that on the NMS. [Example] MD5
Authentication Key	Password used to verify whether the NMS user is valid.	The value must be the same as the authentication password configured on the NMS. [Example] authkey
Encryption Algorithm	Encryption algorithm used to encrypt the transmitted data. AES and DES algorithms are supported.	The value must be the same as that on the NMS. [Example] AES
Encryption Key	Password used to encrypt the transmitted data.	The value must be the same as the encryption password configured on the NMS. [Example] prikey
Device Location	Physical location of the managed device. This information allows the administrator to quickly locate a faulty device.	-
Contact Info	Contact information of the maintenance engineer of the managed device. This information allows the administrator to easily get in touch with the device-related personnel.	-
Trap Receiver Click Create to add a trap receiver.
Trap Receiver	Destination host address that receives the Trap message.	[Example] 1.1.1.2
Port	Number of the port used by the managed device to send a Trap message to the destination host. The default value is 162.	[Example] 162
Type	Trap type. The options are TRAP, TRAP2, and INFORM.	The type is TRAP2 in most cases. [Example] TRAP2
Security Username	Credential used by the device to report alarm information to the NMS server.	The value must be the same as that on the NMS server. [Example] user1

(4)

Click Save.

Welcome to Ruijie Community (https://community.ruijienetworks.com/)