Title: Wireless Rate Limit On SSID Level is not working [Print this page] Author: ajie.pahlevi@gm Time: 2025-4-13 20:35 Title: Wireless Rate Limit On SSID Level is not working Dear Support and Expert,
I have using Ruijie and Reyee for the first time and I'm encountering an issue as per subject. I have configured common SSID with rate limit per user ENABLED, however based on the test using speedtest, the limitation is not there. the speed is just same as the SSID which are not having rate limit.
Below is my devices. Between Master (EG105G) and Main (EW3000GX) were connected through cable, the rest are mesh.
the following are the configuration that I have applied
below the speed test result using ssid TAMU and the speed is surpassing the limit that I have set.
if someone have any clue on how to configure it correctly, please kindly share the way to achieve that.
thanks a lot for the support and guidance. Author: guominxiang@rui Time: 2025-4-13 22:10
Hello,
Can I know what is EW working mode? Is access point mode?
If so, EW does not support flow control in this mode. That means you can't control the user's speed on EW. If you want, you can configure it on EG based on user network segment:
