Title: RG-EG1510XS Make a particulr VLAN in my network going out to a selected ISP provider under balanced load mode [Print this page] Author: danimv47@gmail. Time: 2025-4-14 01:48 Title: RG-EG1510XS Make a particulr VLAN in my network going out to a selected ISP provider under balanced load mode Hello:
I created a particular VLAN for Video IPTV, I also have a balanced load through 3 ISP ´s for all traffic, ISP1, ISP2, ISP3. I want to go out with VLAN for IPTV through a particular ISP 1 provider. Rest of the traffic, must be balanced.
How can I do that in the router RG-EG1510XS
Regards Author: v-shiyangyang@r Time: 2025-4-15 09:40
To configure a specific VLAN on the [strong]RG-EG1510XS[/strong] to route traffic through a selected ISP provider under [strong]balanced load mode[/strong], follow these steps: Step 1: Configure the VLAN
Access the eWeb management platform of the RG-EG1510XS.
Navigate to Gateway > Config > Network> LAN> LAN Settings.
Create the VLAN:
Assign a [strong]VLAN ID[/strong] and configure the [strong]IP address[/strong] and [strong]subnet mask[/strong] for the VLAN.
Example:
VLAN ID: 20
IP Address: 192.168.20.1
Subnet Mask: 255.255.255.0
Save the configuration. Step 2: Configure WAN Interfaces
Go to Gateway > Basics> WAN.
Configure the WAN interfaces for your ISP providers:
Assign the appropriate IP addresses, subnet masks, and gateway information for each WAN interface. Example:
WAN0: ISP1
WAN1: ISP2
Save the configuration. Step 3: Set Load Balancing Mode
Navigate to Gateway > Basics > ISP/Load Settings.
Select Balanced Mode.
Configure the weight for each WAN interface:
Example:
WAN0 Weight: 3
WAN1 Weight: 2
This ensures traffic is distributed proportionally (e.g., 60% on WAN0 and 40% on WAN1).
Save the configuration. Step 4: Bind VLAN to a Specific WAN
Go to Gateway > Config> Network > LAN > LAN Settings.
Locate the VLAN you created (e.g., VLAN 20).
Bind the VLAN to the desired WAN interface:
Example: Bind VLAN 20 to [strong]WAN0[/strong] (ISP1).
Save the configuration. Step 5: Verify the Configuration
Test the network to ensure that traffic from the specific VLAN is routed through the selected ISP provider.
Monitor the traffic distribution under Gateway > Monitor >Traffic Statistics.
Welcome to Ruijie Community (https://community.ruijienetworks.com/)