Ruijie Community

Title: How to use Ruijie RG-ES208GC for loop protection [Print this page]

Author: fbachri@gmail.c Time: 2025-5-4 18:06
Title: How to use Ruijie RG-ES208GC for loop protection
Hi,
I have my home network with topology as per below image, anyone can help me an advise to setup Ruijie RG-ES208GC for solving my issue as explained in the image?

Thanks,
Fauzie

Author: v-shaojinren@ru Time: 2025-5-5 12:08
Dear customer,

You can navigate to Monitoring > Loop Prevention page and enabledloop guard feature
.

When loop guard feature is enabled, the port causing the loop will be shut down automatically. After the loop is removed, the port will be up automatically. Loop guard function is disabled by default.

Author: fbachri@gmail.c Time: 2025-5-5 12:52

GTAC-Ryan replied at 2025-5-5 12:08
Dear customer,

You can navigate to Monitoring > Loop Prevention page and enabledloop guard feature

Hi Thank you for your reply, could advice also port setting in the swirch as per my topology? When i should use trunk or access type

Thanks,
Fauzie

Welcome to Ruijie Community (https://community.ruijienetworks.com/)