Title: Request Assistance: Assigning Specific SSIDs to Individual APs Within a Group [Print this page] Author: Princem@osprey. Time: 2025-6-6 18:27 Title: Request Assistance: Assigning Specific SSIDs to Individual APs Within a Group Dear Ruijie Support Team,
I am writing to seek guidance on configuring SSID assignments across multiple Access Points (APs) within the same network group. Here are the details of my setup and issue:
Current Setup:
Number of APs: 3 (all under one group in Ruijie Cloud/local management).
SSIDs Configured: 3 (SSID-A, SSID-B, SSID-C).
Goal:
AP1 & AP2: Broadcast SSID-A and SSID-B (but not SSID-C).
AP3: Broadcast SSID-C only (disable SSID-A and SSID-B).
</li>
All APs must remain in the same network/VLAN.
Issue:
I cannot find an option in Ruijie Cloud or the local web portal to selectively enable/disable SSIDs per AP within a group.
The settings appear to apply universally to all APs in the group.
Request:
Confirm if this granular SSID-per-AP configuration is possible.
Provide step-by-step instructions or screenshots to achieve this.
If not natively supported, suggest workarounds (e.g., VLAN tagging, separate groups).