Ruijie Community

Title: Mix wireless bridge RG-EST350v2 and RG-EST330F-P [Print this page]

Author: jay-R    Time: 2025-6-27 20:56
Title: Mix wireless bridge RG-EST350v2 and RG-EST330F-P
Hi. can anyone try to use RG-EST350v2 as AP (NVR mode) and RG-EST330F-P as Station (CPE mode), coz im planning to use point to multi point. since i have existing RG-EST350G then can i add RG-EST330F-P so i can directly connect the camera to POE out. thank you.


Author: guominxiang@rui    Time: 2025-6-28 00:05
Hello,

RG-EST350v2 support configure ptp with RG-EST330F-P, the distance is less then 3 km. If you need ptmp: RG-EST330F-P  -->  3x RG-EST350v2






Best regards,



Micca




Author: jay-R    Time: 2025-6-30 23:34
GTAC-Micca replied at 2025-6-28 00:05
Hello,

RG-EST350v2 support configure ptp with RG-EST330F-P, the distance is less then 3 km. If you  ...

Hello Mica, i Got it. my deployment plan is ptmp distance is less than 2km. thank you for the reply.







Welcome to Ruijie Community (https://community.ruijienetworks.com/) Powered by Discuz! X3.2