Title: How to upload clients ip address to radius server when use wireless 802.1X auth and mab auth [Print this page] Author: GTAC-Daisy Time: 2019-7-22 14:13 Title: How to upload clients ip address to radius server when use wireless 802.1X auth and mab auth How to upload clients ip address to radius server when use wireless 802.1X auth and mab auth Author: GTAC-Daisy Time: 2019-7-22 14:15
About 1X and mab auth ,
can enable dhcp snooping on AC.
and then ''dot1x valid-ip-acct enable'' on AC.
Attention：with the second command, if the IP of clients is static ip, dhcp snooping table can't be generated, so the static ip clients will be kick offlineAuthor: AlmaMcAtee Time: 2021-6-29 08:23
Client computers and devices, such as laptop computers, tablets, phones, and other computers running client operating systems, are not RADIUS clients. RADIUS clients are network access servers - such as wireless access points, 802.1X-capable switches, virtual private network (VPN) servers like the USA, UK France, etc, and dial-up servers -because they use the RADIUS protocol to communicate with RADIUS servers, such as Network Policy Server (NPS) servers this link will help you https://www.cisco.com/en/US/docs ... hapter_0111000.htmlAuthor: GTAC-Daisy Time: 2021-7-12 17:34
