Ruijie Community

Title: how to see roaming already works or not on our AC? [Print this page]

Author: GTAC-Daisy Time: 2019-8-20 10:52
Title: how to see roaming already works or not on our AC?
On the AC, run the ''show ac-config client detail mac-address''

The user status is Roam.

AC#show ac-config client detail a088.b413.c754

Mac Address       :a088.b413.c754

IP Address       :::

Wlan Id          :1

Vlan Id          :111

Roam State       :Roam

Associated Ap Information:

AP Name          :AP-01

AP IP             :192.168.97.10

Author: ITM.KOHSAMUI@EX Time: 2023-4-24 11:12
why my AC RG-WS6008 is showing Roam state = local ?
Associated Ap Information:
AP Name          :lobby
AP IP             :10.0.100.167
EXKS_SER_AC_01#show ac-config client detail 1210.eb43.6866
No client with mac 1210.eb43.6866 exist.
EXKS_SER_AC_01#show ac-config client detail 1af7.d0de.384c
Mac Address       :1af7.d0de.384c
IP Address       :10.128.28.113
Wlan Id          :1
Vlan Id          :50
Roam State       :local
Association ID    :339

Author: yujiamin@ruijie Time: 2023-4-25 09:36

Explorar Hotels replied at 2023-4-24 11:12
why my AC RG-WS6008 is showing Roam state = local ?
Associated Ap Information:
AP Name : ...

Dear sir

Roam state = local
means the clients hasn't roamed. You can use this command to check all the roaming users on the AC, then check again whether the user roam state displays normally:
Ruijie# show mobility user

Best regards
Jenny

Welcome to Ruijie Community (https://community.ruijienetworks.com/)