Title: Why some poe switch port can’t power for AP? [Print this page] Author: GTAC-Daisy Time: 2019-8-20 11:17 Title: Why some poe switch port can’t power for AP? When you find PoE switch port can't power for AP,
Try to enable poe legacy
switch(config)#int gi 0/x
switch(config-if)#poe legacy
If don't support enable under interface, try to enable on config mode.
switch(config)#poe legacy
Notice: when enable poe legacy on config mode, need to disable poe on interface don't need to supply POE. Or there is a risk of burning.
Welcome to Ruijie Community (https://community.ruijienetworks.com/)