Ruijie Community

Title: There is no responding when telnet device via SNC. [Print this page]

Author: admin Time: 2017-5-3 19:32
Title: There is no responding when telnet device via SNC.
There is no responding when telnet device via SNC.

Author: admin Time: 2017-5-3 19:32

Step 1: This fault is caused when the safety strategy of the Internet Explorer (IE) forbids the direct calling of Telnet in the IE. In this case, you can change the registration table by copying the following content to the notebook, save it as a .rag file, and double click it to run the file.

REGEDIT4

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet

Explorer\Main\FeatureControl\FEATURE_DISABLE_TELNET_PROTOCOL]

"iexplore.exe"=dword:00000000.

If the fault persists, proceed to Step 2.

Step 2: Install SecureCRT on the PC, and choose Options > Global Options > Web browser to set SecureCRT as the default Telnet program, and try to telnet again.

Welcome to Ruijie Community (https://community.ruijienetworks.com/)