Ruijie Community

Title: How to change the AP management ip [Print this page]

Author: phothxa.hybrid@ Time: 2020-12-27 22:05
Is this the default interface used to connect to Ruijie Cloud (Public)? I have configured two VLANs (30 and 31) and wireless users are getting internet connections and DHCP addresses assigned from the router? However, I can't seem to register the AP in Ruijie Cloud if I use the custom VLANs.

Author: GTAC-Daisy Time: 2021-5-20 11:37

phothxa.hybrid@ replied at 2020-12-27 22:05
Is this the default interface used to connect to Ruijie Cloud (Public)? I have configured two VLANs ...

Better use int BVI 1.
If you want the AP uses another VLAN, you can set the uplink switch interface to be another VLAN, and then the AP will get another VLAN.

Author: ICT-infra Time: 2023-10-20 17:56
Can I assign VLAN on BV1 interface? ex. from default VLAN1 to VLAN 10.

Author: chenchunyan@rui Time: 2023-10-20 18:10

Domz Magadia replied at 2023-10-20 17:56
Can I assign VLAN on BV1 interface? ex. from default VLAN1 to VLAN 10.

Dear,
Bvi1 corresponds to Vlan1 and cannot be changed, but you can change the ip address in it.
For example, only after you create vlan 10, you can enter bvi 10.
Best regards,
Vivian

Welcome to Ruijie Community (https://community.ruijienetworks.com/)