Ruijie Community

Title: How to format the device flash? [Print this page]

Author: GTAC-Daisy Time: 2021-6-7 16:05
Title: How to format the device flash?

Press Ctrl+C to enter Boot Menu 0

Net: eth0
Enimple UI....

======der Menu" to upper level) ======
TOP menu i****************************************
0. Tftp utilities.
1. XModem utilities.
2. Run m 3. SetMac utilities.
4. Scatteredes.
************************************************
Press a key to run the command: 4

====== BootLoader Menu("Ctrl+Z" to upper level) ======
Scattered utilities.
************************************************
0. Show the bootloader version.
1. Reload system.
2. Set baudrate.
3. Advanced settings.
************************************************
Press a key to run the command: 3

====== BootLoader Menu("Ctrl+Z" to upper level) ======
Advanced settings.
************************************************
0. Set Fast boot.
1. Set Support Shell.
2. Open/Close debug switch.
3. Format flash filesystem.
4. Set default environment.
************************************************
Press a key to run the command:3

Author: jonesPhedra@gma Time: 2021-6-29 10:42
thank you very much, i will apply these codes. shell shockers unblocked

Welcome to Ruijie Community (https://community.ruijienetworks.com/)