Ruijie Community

Title: How to capture packet on AC using Wireshark? [Print this page]

Author: GTAC-Daisy Time: 2021-8-2 13:04
Title: How to capture packet on AC using Wireshark?

When there are wireless 802.1x or web issues, need capture packet to check, you can refer to the following guide to capture the auth packet on the AC.

1.topology

2. Port Mirror

Configuring the following command on AC.

Ruijie(config)#monitorsession 1 source interface gigabitEthernet 0/3 both ----you can change the port by ture

Ruijie(config)#monitorsession 1 destination interface gigabitEthernet 0/1 switch

3. After PC connect to AC,open thewireshark, choose the interfaces to capture from, then start

4.try to connect to the ssid and import username and password

5.save the packet

Welcome to Ruijie Community (https://community.ruijienetworks.com/)