Ruijie Community

Title: How to config aggragation port on reyee switch? [Print this page]

Author: GTAC-Daisy Time: 2021-8-2 15:39
Title: How to config aggragation port on reyee switch?
Login the reyee switch which support link aggregation, NBS3100, NBS3200, NBS5100 and NBS5200 can support.
Step 1: Choose Switches → Manage to configure the switch

Step 2：Choose Ports → Aggregate Ports to configure the link aggregation

Step 3: Fill in the aggregate port number and select the port member.

Author: ahfatt_606@hotm Time: 2021-8-18 19:23
hi, what is the meaning under the global setting > load balance? which one should i choose?

Author: GTAC-Daisy Time: 2021-8-19 19:26

ahfatt_606@hotm replied at 2021-8-18 19:23
hi, what is the meaning under the global setting > load balance? which one should i choose?

recommend src-dst-ip

Author: GTAC-Daisy Time: 2021-8-19 19:26

ahfatt_606@hotm replied at 2021-8-18 19:23
hi, what is the meaning under the global setting > load balance? which one should i choose?

dst-mac: Distribute traffic based on the destination MAC address of the incoming message.

src-mac: Perform traffic distribution based on the source MAC address of the input message.

src-dst-ip: Distribute traffic based on source IP and destination IP.

dst-ip: Distribute traffic based on the destination IP address of the input message.

src-ip: Distribute traffic based on the source IP address of the input message.

src-dst-mac: Distribute traffic based on source MAC and destination MAC.

Author: ahfatt_606@hotm Time: 2021-8-21 05:50
Thanks Daisy, by the way, does NBS series support IEEE 802.3ad LACP and IEEE 802.3ad draft v1?

Author: GTAC-Daisy Time: 2021-8-23 16:40

ahfatt_606@hotm replied at 2021-8-21 05:50
Thanks Daisy, by the way, does NBS series support IEEE 802.3ad LACP and IEEE 802.3ad draft v1?

Can support static port aggregation.

Author: ahfatt_606@hotm Time: 2021-8-24 12:00
thanks for the reply

Welcome to Ruijie Community (https://community.ruijienetworks.com/)