Ruijie Community

Title: How to configure VLAN for default port in Reyee EG？ [Print this page]

Author: GTAC-Henry Time: 2021-8-27 11:12
Title: How to configure VLAN for default port in Reyee EG？

1. Add a new VLAN port on LAN settings.

2. Configure the port based on the VLAN

3. Some items for port VLAN
(1) Toconfigure port VLAN, need to add the VLAN interface first
a)Whenadding vlan to the lan port, the range of vlan is 2-232, 234-4090
b)VLAN233 is occupied by default, this VLAN cannot be configured
(2) Thereare 3 options in the each port: TAG, UNTAG, and not Join
a)Forport 0, the UNTAG of the default VLAN cannot be modified
b)Forother ports, only one vlan can be set to UNTAG and can be multiple TAG and NotJoin

UNTAG：Theport does not carry the vlan tag when sending the packets, similar to thenative vlan configuration of the switch

TAG: Thepackets corresponding to the VLAN sent from the port will carry the VLAN tag,similar to the non-native VLAN of the trunk port

NotJoin：Theport does not belong to the vlan and does not participate in the forwarding ofthe vlan packet, which is removing the vlan when configuring the allow vlanunder the trunk

Welcome to Ruijie Community (https://community.ruijienetworks.com/)