Ruijie Community

Title: How to configure Port Mapping and NAT-DMZ on Reyee-Gateway [Print this page]

Author: chenlin5@ruijie Time: 2021-8-26 00:21
Title: How to configure Port Mapping and NAT-DMZ on Reyee-Gateway
How to configure Port Mapping and NAT-DMZ on Reyee-Gateway

Application Scenario

A customer deploys a server on the LAN and enables the HTTP or other services. The server address is a private address. WAN users can neither access this address directly nor use services provided by the server. In this case, you can enable the port mapping function to allow WAN users to access the LAN server.

For example, the server address is 192.168.1.20 and HTTP is enabled. As the server address is a private address, WAN users cannot directly access the HTTP service provided by the server. In this case, you can map the server address and server ports to a public network address on the EG device so that WAN users can access the HTTP service provided by the server.

Sample topology

Port Mapping
Step 1:Choose Gateway → Advanced → Port Mapping

Step 2:Add a new Policy

Step 3:Enter 172.26.6.93:80 on browser

Port Mapping succeeded

NAT-DMZ(Special port mapping---port full mapping)
Step 1:Choose Gateway → Advanced → Port Mapping→ DMZ

Step 2:Add a new Policy

Step 3:Enter 172.26.6.93 on browser

NAT-Mapping succeeded

Welcome to Ruijie Community (https://community.ruijienetworks.com/)